Howdy, Did someone already create Ansible modules for Ruckus? There are for Aruba http://docs.ansible.com/ansible/latest/aruba_command_module.html and http://docs.ansible.com/ansible/latest/aruba_config_module.html#aruba-configThanks!
Does anyone has some
experience with the Application Visibility feature?
How much does it impact
an AP CPU utilization / ZD CPU utilization?
AP – ZF7982, R700, R710
ZD – ZD3k
The average load per AP in
terms of clients: 50
With only 8 APs the Z...
I cannot
log into the training portal. Did something changed recently?
I already send an e-mail to trainingsupport@ruckuswireless.com and
training@ruckuswireless.com (according to the KB article https://support.ruckuswireless.com/answers/000001929 ) ...
In our campus we have multiple conferences happening daily and frequent visiting guests.
It would be very useful for our guestpass managers to have the possibility to choose the starting date for the Guest Validity instead of choosing the duration...
You should make sure that the release version used is compatible with
the AP model. You can see this information in the release notes (section
Supported Platforms).If you buy a ZF7982 or R700 which is running 9.9 and approve it on your ZD running 9...
Hi Matt, If you upgrade the ZD, the APs will also be upgraded and the wifi service is interrupted for your users. This should be done during a maintenance window. The ZF7962 are only supported until version 9.8 (latest 9.8.3.0.58). Make sure that the...
I used the set-factory command in the past on a vSZ-E node and turned it into a vSZ-H. The SN did not change. No changes on the VMware. You should ask a SE and Support for advice.
Why don't you test first with curl command in a terminal? If it works, then you know it is not related to the SZ, and probably the issue is with the php code. You could try something like "curl -I https://nameSZ:8443" If the output contains "HTTP/1....
Hi Julian, You need to do a factory reset. To reset to factory settings of the controller system, use the following command:ruckus# set-factoryas written in the Command Reference Guide.
