CommScope RUCKUS Community Forums

Good evening,I have an installation with 3 R500 on Firmware 200.7. When I log into the unleashed web interface, I can see the page with all the items, and when I unfold the 'Access Points' item, I can sometimes see the AP's but when I click on the it...

Good morning everbody,I have a little doubt about the antenna pattern diagrams in the data sheet. I know the APs all have a donut shaped antenna pattern and I have understood the difference between elevation and azimuth.My question is whether the ele...

I have a customer who measures between 400 and 500 Mbit/s between his APs which are on a multi-gigabit switch. I have seen similar values in a completely different setup in our office. The Wifi speeds are between 600 and 1300 Mbit/s depending on the ...

For a customer with a 10G fiber internet connection, we are trying to maximise the throughput on his R650. We are getting up to 1.4 Gbit/s when directly connecting to the router of the provider and around 2 Gbit/s if we connect a PC to the 2.5G Ether...

Hello, I have a couple of APs that have come back from an installation and after a factory reset (pushing the button), I have no way of connecting to a configuration interface (neither HTTP, HTTPS nor SSH). I see connection refused in the browser ...