Hi everyone,
We have deployed couple of ICX-7150 Switches as the Access layer (Multiple floors / stacks) and 2x ICX-7450 as the Core. All the access switch stacks are getting connected to the core via 2x 1G links (Eg: 3-switch stack group; 1 link ...
Hi everyone, we have around 80 Unleashed APs and we're planning to purchase Ruckus Cloud. Is there a direct way we can convert these to be operational on cloud? Or will we have to convert each AP to standalone mode?
Planning to deploy 100+ APs in to a SZ cluster (2x SZ104). What's the best way to enable AP discovery by the WLC?
WLC IP is in 172.x.x.x/24 range (MGT). Do the APs have to be in the same range as the WLC to be discovered? If so, how can we enable ...
Hey everyone, are we able to create multiple admin accounts with different privilege levels in a single Ruckus Unleashed network? If it's possible, please do share a guide which shows that. Thanks in advance.
Hi @tim_brumbaugh,
Yes, STP is enabled. I've shared below the configs for Core and Access (10th floor). I will share the event logs once I get access again to the network. When I compared the configs of 10th floor stack with a functional stack (No L...
Hi @syamantak_omer & @sanjay_kumar
When we connect a brand new AP or a FR-ed AP, it joins the cluster, wtihout doing any changes from the WLC-end. These APs previously received IPs from the same DHCP pool.
As I remember, these APs went down whe...
Hi @sam_evans,
Facing a minor issue here. Since by default, all the APs are set up with 192.168.0.1, Crossbreeder is unable to identify all the APs. So we created a DHCP server in one of the Switches with DHCP option 43. However, the APs are not r...
