Can you please advise what domains you're using for MSP customer tenant dashboards?I received a bug report for the Home Assistant integration, but the MSP URL provided in the report (https://MSPNAME.msp.ruckus.cloud) isn't in your Firewall Ports docu...
The Ruckus One Trial page says to "fill out the form below" for a trial, but there is no form.(I tried creating a My Ruckus account, in case that was necessary, but it hasn't helped).
Since this release fixes CVE-2023-49225 could you please make these images downloadable without premium support?(you've previously indicated that solo releases shouldn't be premium)
Is there updated guidance for firewall ports to open, for ZoneDirector 10.5.1?
I did an upgrade to 10.5.1.0.124, and all of my APs (R600s, H510s, R650s) failed to upgrade.
I reverted to 10.5.0.0.212, turned on Secured AP Image Upgrade, and re-a...
I have a couple of cross-town WAN links which currently use an OpenVPN tunnel.
LAN <=> OpenVPN <==== 35ms ====> OpenVPN <=> R600
I get basically full wire speed from this setup (>200Mbps).
I'd like to replace the OpenVPN boxes with an LWAPP tunnel f...
You can't upgrade without a support entitlement. And it's been impossible to buy ZD3000 support for so long that no ZD3000 has the necessary entitlement anymore.Since this is the vendor's forum I won't post any workaround here. But if you asked this ...
You can't just use a firmware upgrade file.But the flash disk is probably still healthy enough to pull out and copy to a new flash drive using your computer.Try the instructions here:-https://ms264556.net/ruckus/MigrateDeadZoneDirector#i-have-a-dead-...
The release notes call out that this is not supported:RESTRICTIONUpgrading from SmartZone 6.1.2 (Patch 5) to software versions 7.0.0 (ST-GA), 7.1.0 (LT-GA), or 7.1.1 (LT-GA) is not supported
