Since this release fixes CVE-2023-49225 could you please make these images downloadable without premium support?(you've previously indicated that solo releases shouldn't be premium)
Is there updated guidance for firewall ports to open, for ZoneDirector 10.5.1?
I did an upgrade to 10.5.1.0.124, and all of my APs (R600s, H510s, R650s) failed to upgrade.
I reverted to 10.5.0.0.212, turned on Secured AP Image Upgrade, and re-a...
I have a couple of cross-town WAN links which currently use an OpenVPN tunnel.
LAN <=> OpenVPN <==== 35ms ====> OpenVPN <=> R600
I get basically full wire speed from this setup (>200Mbps).
I'd like to replace the OpenVPN boxes with an LWAPP tunnel f...
The APs won't join your ZoneDirector if they're running SmartZone or Cloud firmware (i.e. version 3.6, 5.1, 5.2, 6.0 or 6.1). In this case they'll need to be factory reset and upgraded to Solo firmware first.The APs will also fail to join if you've b...
You can't upgrade your unsigned 9.13 firmware directly to fully signed (FSI) Unleashed firmware.You'll need to upgrade first to an intermediate signed (ISI) firmware, e.g. Solo 104 or 106. Then you can install the latest Unleashed firmware.
If you just want to see AP antenna elements then the largest APs (e.g. T610/T710/R730/R850) have double-decker boards so you see nothing but antenna when you open them. e.g....Or grab a ZF7962 for $1. The lids pop right off & they have the biggest ar...
That's from the FCC filing. You can grab the FCC Internal Photos PDF if you want to be sure.There's also an internal photo which a user posted on the ServeTheHome forums. The image is here:- https://fohdeesha.com/data/other/R750/board.jpg