Hello gents,I've
bought an older R500 AP and flashed the last released standalone image
on it. The AP is connected to an stupid layer2 switch and this one is
connected to a physical OPNsense port. On the OPNsense the gateway for
the LAN is 192.1...
Hi,I've tested this before. I connected the AP directly to the physical port of the opnsense and configured the subnet with 192.168.20.0/24 and I had the same problem. After the gateway nothing passed the firewall.But what is the difference if the AP...
Hi,sorry for the late response.Attached you can find the configuration settings as screenshots.I have no DHCP server running on the firewall gateway, the AP is doing the DHCP job. This works fine, I get an IP and everything with that. But there is no...
