I've tried with the controller and it fails the update to enable PoE on eth0 (interface 1) PoE out interface. Controller successfully updates other settings on same T750. Have tried on 2 brand new T750 APs. I also tried via the CLI and is still faile...
I have looked at the troubleshooting area on the controller for my test client and I noticed the difference between a good complete connection from the R720 and the T750. The R720 provided DHCP offering form the DHCP server and the T750 did not so it...
I have 1 SSID (Guest Access) user traffic ACL with rate limited to 20 mpbs up/dn. Is this 20 mbps per user attached to that SSID or is that the limit of the entire SSID throughput? I am currently bridge @ AP and have yet to implement tunnel to contro...
I have a vSZ, vSCG upgraded to 3.1.1, and need to increase the client session idle timeout to 90 minutes. Currently it will only go to 1000 seconds. How can I increase this idle timeout.
It's probably our ticket. So there is no one else with T750 on vSZH using vSZD? or that are reporting any issues? Because if that's the case then I wish they would comment that they are working fine.
Here is our current ticket...
Case ID: 01149...
No this isn't too in depth. I am currently working from Home and have a coworker who is workikng on this also from teh office. He is the one with teh support ticket open. Maybe we shouldn't approach this from both sides? I simply wanted to hear fo...
I am saying the T750 is getting an IP address just fine. The client is not getting an IP address while connected to an SSID that "tunnels". If we use an SSID that is Bridge @AP then we can get a dhcp address on that local subnet. So to me it seems t...
