CommScope RUCKUS Community Forums

Hi guys,We have a Virtual Smartzone installed on a VM and we would like to implement redundancy. The goal is to have like two active/passive or active/active instances:- in case of the failure of an instance, the APs should be able to join another on...

Hi Guys,I  have a virtual SmartZone deployed on the Cloud, the APs can join it via its public IP through the internet connection.I would like to connect my SSID to the local network and let the clients use the local network even if the internet conne...

Hi guys,I have a network composed of some indoor APs in remote locations. All the APs are connected to a virtual SmartZone in Bridge mode.I am using an external captive portal server and an external radius for authentication. There is no layer 3 mobi...

Hi guys,I have a Vitual SmartZone 3.2 and would like to apply a user role to a hotspot and local DB users. I can configure a user role under IDENTITY>USER ROLE but I am not able to find out how can I apply this user role to a WLAN or Hotspot profile,...

Hi Everyone,I have setup a WLAN with a WISPr profile (external Portal). I am currently redirected correctly to the captive portal, however I cannot authenticate because the my Radius Server is not reachable from my vSZ which is acting as a Radius Pro...