One of our users has accidently wiped our Brocade Fastiron 624p Switch. It comes up to boot cli but has no primary or secondary image. How do I get a flash image back on this switch?
erase startup-config doesn't work since I cant get past the password. If I power down and back up the switch I lose the firmware because of not being able to save. Is there a firmware I can download that has a wipe of configuration as well?
I tried the no password typed out and still no change. Then I tried typing it after the ip was assigned.FGS-Boot>ip add 169.254.37.215BOOT INFO: load monitor from boot flash, size = 105737BOOT INFO: prepare tftp client..IP address = 169.254.37.215, s...
FGS Boot Code Version 05.0.00Enter 'b' to stop at boot ...BOOT INFO: primary does not existBOOT INFO: secondary does not existFGS-Boot>no passOK! Skip password check when the system is up.FGS-Boot>ip add 169.254.233.200BOOT INFO: load monitor from bo...
no password works but when the new image takes effect it still request the password. Once I power it down it looses its image to not being able to copy it to the primary.
