CommScope RUCKUS Community Forums

zlinuxboy · 01-04-2024

hi, community.I have a unleashed built by two R600s. R600-1 is the master, accessident lost the power. R600-2 take the master role over, and I did some config modified and work a well. after couple hours I found the issue and reconnect the R600-1 bac...

zlinuxboy · 12-26-2023

I have some R500s, firmware is 200.7, and two R610s firmware is 200.7 too.Any possible to do that:1. I prefer to set two R610s as unleashed master, r610-1 for master , r610-2 for master backup. when r610-1 failed, the r610-2 will take over the master...

zlinuxboy · 01-04-2024

even after I unplug the R600-1, R600-2 take over the master, but the modified config is still lost.

zlinuxboy · 12-28-2023

Another question, the "zero-it and dpsk" is missing under wlan creation tab.here is the screenMy ap is r600 running 200.7.10.202.145 unleashed. any idea?

zlinuxboy · 12-27-2023

Thanks for clarification

CommScope RUCKUS Community Forums

User Statistics

User Activity

How to correctly reconnect the failed ap under unleashed?

Some question about R610 and R500 work together under unleashed.

Re: How to correctly reconnect the failed ap under unleashed?

Re: Some question about R610 and R500 work together under unleashed.

Re: Some question about R610 and R500 work together under unleashed.