cancel
Showing results for 
Search instead for 
Did you mean: 

Some question about R610 and R500 work together under unleashed.

zlinuxboy
New Contributor II

I have some R500s, firmware is 200.7, and two R610s firmware is 200.7 too.

Any possible to do that:

1. I prefer to set two R610s as unleashed master, r610-1 for master , r610-2 for master backup. when r610-1 failed, the r610-2 will take over the master role.

2. R500 as unleashed member

3. The max number of R500s will overcome the 25 limit

 

2 ACCEPTED SOLUTIONS

syamantakomer
Community Admin
Community Admin

Hi @zlinuxboy,

You can set the preferred master in 200.7 but I do not think second master preference option is available in 200.7.

R500 and R610s can work together in single Unleashed network as both are supported in 200.7.

syamantakomer_0-1703688599337.png

Refer the below path in Unleashed to configure preferred master.

syamantakomer_1-1703688658527.png

Also, you can use up-to 50* APs in Unleashed 200.7 version.

For more information please refer to the Unleashed 200.7 admin Guide.


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RASZA | RICXI

RUCKUS Networks, CommScope!

Follow me on LinkedIn

View solution in original post

Hi @zlinuxboy,

Please confirm if you have any additional queries. If not, could you please accept the previous reply as a accepted solution, to complete this thread.


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RASZA | RICXI

RUCKUS Networks, CommScope!

Follow me on LinkedIn

View solution in original post

4 REPLIES 4

syamantakomer
Community Admin
Community Admin

Hi @zlinuxboy,

You can set the preferred master in 200.7 but I do not think second master preference option is available in 200.7.

R500 and R610s can work together in single Unleashed network as both are supported in 200.7.

syamantakomer_0-1703688599337.png

Refer the below path in Unleashed to configure preferred master.

syamantakomer_1-1703688658527.png

Also, you can use up-to 50* APs in Unleashed 200.7 version.

For more information please refer to the Unleashed 200.7 admin Guide.


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RASZA | RICXI

RUCKUS Networks, CommScope!

Follow me on LinkedIn

Thanks for clarification

Hi @zlinuxboy,

Please confirm if you have any additional queries. If not, could you please accept the previous reply as a accepted solution, to complete this thread.


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RASZA | RICXI

RUCKUS Networks, CommScope!

Follow me on LinkedIn

zlinuxboy
New Contributor II

Another question, the "zero-it and dpsk" is missing under wlan creation tab.here is the screen

zlinuxboy_0-1703752177605.png

My ap is r600 running 200.7.10.202.145 unleashed. any idea?