CommScope RUCKUS Community Forums

vick_ehrmann_77 · 11-29-2016

I am cutting over a network at 1000 room resort and we have 2 SmartZone 100s in a cluster with 550 H500s connected. We needed to change the VLAN/IP/Subnet for the APs and the SZ. I changed the IP addresses on the APs without an issue through the SZ...

vick_ehrmann_77 · 06-24-2016

vick_ehrmann_77 · 11-29-2016

Thanks Albert, So how do I know if the new settings are being replicated across the control plane? The configuration changes were done almost 5 hours ago and the cluster information in both SZs show the old IP address for the opposite SZ. Seems l...

vick_ehrmann_77 · 11-29-2016

No, Switches have basic configs on them currently. Couple VLANs and a MGMT IP. Ports are configured properly on the MGMT VLAN as I can ping all APs. They just aren't connecting to the controller since the IPs were changed.

vick_ehrmann_77 · 06-27-2016

I suggested that but never received a real answer as to why they chose to go with the R500 instead.

vick_ehrmann_77 · 06-26-2016

Thanks Max,Keep in mind this is not my design, was just hired to integrate it. Small hotel using a T5 modem as a backhaul and they want the R500 mounted to the concrete wall next to the T5. Mounting to the ceiling is not an option and the majority o...

CommScope RUCKUS Community Forums

User Statistics

User Activity

Changing IP/Subnet of a SmartZone cluster and APs

What is the optimal orientation of the R500

Re: Changing IP/Subnet of a SmartZone cluster and APs

Re: Changing IP/Subnet of a SmartZone cluster and APs

Re: What is the optimal orientation of the R500

Re: What is the optimal orientation of the R500