CommScope RUCKUS Community Forums

PMcCaw · 07-17-2023

Hi Ruckus Pack, I live in a Lennar Community, and have recently ran in to a problem with our ICX 7150-C12P-2X1G unit.I am encountering this error on the unit: "System: U1-MSG: PoE Severe Error: PD on port 1/1/12 cannot be powered due to power being ...

PMcCaw · 07-24-2023

Hi @Imran,It is still not working.I disconnected all devices except:A laptop (port 1/1/8),PoE Ring doorbell (Port 1/1/9),PoE Ruckus AP direct connected via 3 ft jumper to (port 1/1/12).Port 1/1/1 emptyPort 1/1/3 EmptyPort 1/1/5 EmptyPort 1/1/7 EmptyP...

PMcCaw · 07-21-2023

Hi Imran,Please see photo below, there is no device plugged in to port 1/1/2 (red), and I still have the same response "1/1/2 On Off 0 0 n/a n/a 3 voltage applied from ext src ".As for port 1/1/12 (yellow), I work in the communication industry and ha...

PMcCaw · 07-21-2023

Hi Imran,No it is not working.I disconnected all the ports to remove any possible external power sources, and reran the commands you requested.I am seeing port 1/1/2 is showing "1/1/2 On Off 0 0 n/a n/a 3 voltage applied from ext src "also port 1/1/...

PMcCaw · 07-21-2023

Hi @Imran,There were some device with external power supplies. I disconnected all device except my laptop (port 1/1/8) and one Ruckus AP (port 1/1/12) that is set to be powered via PoE (no external power). SSH@ICX7150-C12 Switch(config-mif-1/1/1-1/1/...

PMcCaw · 07-21-2023

I moved my ISP-Router cable to Port 1/1/7. I receive the same error on my ring port when I enable port 1 and 2.System: U1-MSG: PoE Severe Error: Power being injected on port 1/1/1. No new PDs can get powered on this unit.Configure "no inline power" o...

CommScope RUCKUS Community Forums

User Statistics

User Activity

ICX 7150-C12P-2X1G - System: U1-MSG: PoE Severe Error: PD on port 1/1/x

Re: ICX 7150-C12P-2X1G - System: U1-MSG: PoE Severe Error: PD on port 1/1/x

Re: ICX 7150-C12P-2X1G - System: U1-MSG: PoE Severe Error: PD on port 1/1/x

Re: ICX 7150-C12P-2X1G - System: U1-MSG: PoE Severe Error: PD on port 1/1/x

Re: ICX 7150-C12P-2X1G - System: U1-MSG: PoE Severe Error: PD on port 1/1/x

Re: ICX 7150-C12P-2X1G - System: U1-MSG: PoE Severe Error: PD on port 1/1/x