CommScope RUCKUS Community Forums

Dejeh1 · 03-30-2023

I'm trying to configure an IP address for a single interface using the commandinterface ethernet 1/2/1port-name Frontportip address 10.30.30.1 255.255.255.252but I get the error message Invalid input ->address 10.30.30.1 255.255.255.252Type ? for a l...

Dejeh1 · 03-31-2023

Hi @BenBeck Thanks for the clarification on the VE. Regarding 1/2/1 it's not part of any Vlan, this is an SFP port (X1) and I'll like to configure a static Ip address to it. But its not taking the configinterface ethernet 1/2/1port-name Frontportip a...

Dejeh1 · 03-30-2023

Hi @BenBeck I'm trying to configure an IP address for a single interface using the commandinterface ethernet 1/2/1port-name Frontportip address 10.30.30.1 255.255.255.252but I get the error message Invalid input ->address 10.30.30.1 255.255.255.252Ty...

Dejeh1 · 03-30-2023

Okay will do.Thanks Ben

Dejeh1 · 03-30-2023

Hi @BenBeck I'll like to mention that during the image upgrade, I got the below error message after loading the upgrade image to the secondary partition:[ 348.898300] EXT4-fs error (device mmcblk0p1): ext4_mb_generate_buddy:757: group 1, block bitma...

Dejeh1 · 03-30-2023

Hi @BenBeck Yes I was in interface mode, I tried the step you provided and it worked! Thanks Ben

CommScope RUCKUS Community Forums

User Statistics

User Activity

ICX8200 Interface Configuration

Re: icx8200 v10.0.00

Re: icx8200 v10.0.00

Re: icx8200 v10.0.00

Re: icx8200 v10.0.00

Re: icx8200 v10.0.00