03-06-2024 09:18 AM
How do I configure switch port mac security on a switch connected to a Ruckus R550 Access Point without the switch learning the mac addresses of devices connected to the access point?
03-08-2024 08:47 AM
Hi Dejeh1,
Thank you for reaching us
"What I'm trying to achieve is a situation where only the First Access point connected to that switch port Mac address will be learned by the switch, if another Access point is connected to that same switch port it will block. But so far, the switch port learns both the Access point Mac address and every user connected to the Access point Mac address and we don't want this. "
Based on the above statement below is what I could understand
I suppose the above would be difficult to achieve below is the reason why
If you what only one AP to be used per switch , you can connect only one AP and remaining free ports you can choose to disable so that when a user connects another AP he would have no access to the network. And on ports where you have a wired connection to PC or other device which is not a AP device you can configure secure-mac-address max 1 per port.
I hope this helps
Thanks