CommScope RUCKUS Community Forums

ruckgscz · 07-27-2023

Hello,For new installations we are moving to ICX8200 from 7150. In doing so, I have discovered our SSH ACL does not translate:Before (ICX7150): ssh access-group MyFavoriteACLI cannot find an equivalent command for ICX8200 (FastIron 10). And I don't s...

ruckgscz · 07-06-2023

Hello,I am building out a "zero-touch" template for ICX. Switches will follow DHCP Option 66 to a TFTP server, grab a config according to mac address, and get setup. HOWEVER, in testing, I cannot log into auto-provisioned switches, even when supplyin...

ruckgscz · 01-09-2023

Hello,We have thousands of Ruckus APs and are looking to automate, as manual management is becoming too burdensome. We are looking to check AP LAN Phy negotiated rate and take action if it is not 1 gigabit.From https://community.ruckuswireless.com/t5...

ruckgscz · 08-01-2023

Thanks BenBeck, that "Restricting Remote Access " guide is exactly what I needed. I think my mistake was searching too much for ACL in FI 10, where the new command structure is not ACL in name.

ruckgscz · 07-10-2023

Hi Chandini thanks for the response,You are correct about bad default config. I made the assumption that TFTP auto-provision behaves the same as the copy command (copy tftp running-config ...). It is not the same. TFTP auto-provision applies differe...

ruckgscz · 02-06-2023

Hello bruno_andrade,Great. I didn't know the query API returned different data.It would be nice to see other interface negotiated ethernet rate, but this will work. Fantastic!Thank you very much!

CommScope RUCKUS Community Forums

User Statistics

User Activity

Restrict SSH Access by ACL in ICX8200 (FastIron 10 (9?))

ICX7150 "Zero-Touch" Config via TFTP (DHCP Option 66) cannot log into switch after auto-provisioning

LAN Phy Rate from SmartZone REST API

Re: Restrict SSH Access by ACL in ICX8200 (FastIron 10 (9?))

Re: ICX7150 "Zero-Touch" Config via TFTP (DHCP Option 66) cannot log into switch after aut

Re: LAN Phy Rate from SmartZone REST API