Hi,
I would like download the latest firmware for our ZD:
-------
System Overview: Name= wlc IP Address= ip.add.re.ss MAC Address= 74:3E:2B:xxxxx Uptime= 87d 18h 15m Model= ZD3050 Licensed APs= 75 Serial Number= 501736000057 Version= 10....
Hi,
I would like to know if it is possible to use both interfaces on a R720 Access Points while they are managed by vSZ or ZoneDirector or Smart Zone 100.
We currently use eth1(PoE) managed by either one of the above controllers.
I would lik...
Hi Darrel,
Thanks a lot!
Your ZoneDirector is a model 3000. The last two digits were used to determine how many AP licenses that particular unit shipped with. Eg.:
3025 (released later) = 25 AP licenses
3050 = 50 AP licenses
3250 = 25...
@vineet_nejawala
Thanks a lot for your support Vineet.
> need to make sure currently the power in use is at+
>that will activate second port to be used,
The AP is set at+ PoE but when I connect a device
to the AP, the port is not coming up ...
@vineet_nejawala
Thanks a lot for your answer.
First of all you would need to make sure this AP is working on power mode 802.3at+ for both ports to work as by default R720 second port will be disabled hence it needs power mode 802.3at+ or Pow...
