CommScope RUCKUS Community Forums

jan_willem_henn · 03-16-2021

Hi, My ISP has a max download of 300 Mbit. The R310 Unleashed (5Ghz) has a max throughput of 867 Mbit. I have one location where a wired connection seems unrealistic. What will be the realistic max speed to be achieved on the R310 unleashed, wh...

jan_willem_henn · 03-15-2021

Hi, I have 3 R310 unleashed AP’s, connected by wire (no roaming). two are on the ground floor (attached to ceiling), one on the second floor, facing down. when I am on the first floor, my clients (iPhone) keep connecting to the R310 attached on the...

jan_willem_henn · 03-13-2021

Dear community, I have 3 R310’s in my home, two downstairs and one at the third floor. Unleashed setup, firmware 200.7.10.202.121, wired connected via 1000mbit, PoE af switch (netgear). Roaming works well on AP’s, but WiFi speed on AP’s downstairs ...

jan_willem_henn · 04-15-2021

Please look at this thread and see if that is a solution for you: https://forums.ruckuswireless.com/conversations/ruckus-unleashed/3-unleashed-r310-client-stickiness/604fc61d172ef301a6733f34

jan_willem_henn · 04-15-2021

BSS Min-rate can be configured on Unleashed.

jan_willem_henn · 04-11-2021

Can you validate in the connected client info tab, that the devices that have poor connection, are indeed connected to the closest AP? It is easier to give the AP's a description that describes their physical location, that way it is easier to see i...

jan_willem_henn · 04-11-2021

My advice would be to first name your AP's according to their location. Then check in the admin panel (under connected devices) what happens with your devices if you walk around and change location. Are they connected to the most logical AP? Or are ...

jan_willem_henn · 04-09-2021

wow, this comment is 2 years ago, and the 'errors' are still bloating the logs..

CommScope RUCKUS Community Forums

User Statistics

User Activity

Realistic 5Ghz speed of 'one-hop' mesh unleashed R310

3 unleashed R310, client stickiness

1 of 3 R310’s is underperforming

Re: Poor signal to 1/3 of devices

Re: Poor signal to 1/3 of devices

Re: Poor connection on multiple clients

Re: New Lennar home, a pair of R320 APs, and issues

Re: What does the message "send_controller_config line: 96 Controller connecting error, errno: 2 No such file or directory" mean?