I have got issue within this below -2.4 dan 5 ghz enable some windows connect successful ( 802.1x authentication)-2.4 Ghz only some windows successful connect ( 802.1x authentication)-5 GHz Only windows can not connect ( 802.1x authentication)-W...
Yep.. it sounds like a stupid question, but does R/O SNMP do anything to a zone director that is likely to make it fail? In particular, does it cause excessive writing/reading from NVram or Nand memory,when enabled? or is the data written to ...
Have a 1200 on the latest firmware 10.5.0.0 build 190. some clients are either: 1. loosing the pw for the wifi point 2. loosing the ip address on the client, but teh 1200 clearly shows the mac & ip address as authorized. if I go into "clien...
Hi everybody, I have a wireless controller ZD1200 model runnig 9.10.2.0.76 (MR3, Refresh 76) firmware version and APs T300 and R610 series, my question is: what is the recommended version to upgrade it? And what is the procedure to goal this? Than...
Dear all, A few days ago, I configured 2xZD1200 system settings( name, IP addresses,mgmt interface,vlan, etc...) and done smart redundancy as well. And today when I log in to ZD, I see no data in system settings and cannot view events, logs...
