RUCKUS Community Forums will be set to READ-ONLY mode starting Sunday, August 9 at 6 PM EDT / 3 PM PDT while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 10-17.
I have a network with 2 zone directors. Some of the aps are managed by one of two zone directors, other aps are managed by the second zone director. But, I have 4 aps who are managed by a zone director, status connected, but on the second zone direc...
Dears, I had one experience with ZD1100 in one school where we deployed around 10 AP's 7372's mostly. One AP is in the "Samsung classroom" where they booted up 40 tablets at once connecting to the AP. WPA is on. After successful connection they lo...
HI, How does one Configure a redundant Unit? in the following ways; address, vlans & licenses? e.g my scenario: my zd ipv4 address is 10.10.10.2 in Vlan 5; and my management ip is 77.129.12.5 in vlan 2. Does the redundant Unit have the same ipv4 c...
Hi, We just purchased a new ZoneDirector for 25AP's. Could anybody shed some light on the following scenarios please? 1. If we unplugged the zonedirector for an hour, does all the clients instantly get disconnected too? 2. Does the ZoneDirector ac...
I attempted to upgrade the firmware on an R300 unit, but immediately after the firmware file finished uploading (using the web upgrade page) I lost contact with the unit. I have tried the hard-reset procedure multiple times, and nothing seems to work...
