CommScope RUCKUS Community Forums

tos

Does zone director (ZD1106) support client Roaming between 2.4GHz and 5.0GHz access points

We have ZD1106 zone director with 3 access points ( 2 APs are zf7372 i.e. dual band and 1 AP is zf7341 i.e. single band 2.4Gz only).My questions are below:1. Users who are connected with 5GHz AP when they move near 2.4GHz AP will they connect with it...

Vlan Same Subnet and Diferrent Subnet

Good evening, I am currently conducting laboratory VLAN environments within a network environment where the ZoneDirector is on a separate network access points.I set up an AP and one wireless controller in the same network, connected such as trunk po...

What happens if a controller that can handle 1000 DPSK's reaches the limit of 1000 DPSK's

A ZD1100 controller can manage 1000 DPSK's, what happens with number 1001?

vlan pooling not seamless when connecting to other AP

Hi, I have a warehouse wifi setup consisting of the following:1-ZD3000 with 50AP licence running firmware 9.10.0.0 build 21820-ZoneFlex T300Number of users on the network 15-20 (for RF scanner device only)I have setup vlan pooling(round-robin)I set...