Where can I find some configuration examples? I'm having a lot of issues getting stuff to work. When I have the ports for the ZD1200 and my AP on the Cisco switch set to Trunk vlan 2,3,5,10 and native vlan 10. The ZD and the AP are accessable when the configuration on both are set to Access VLAN1 on the ruckus but if I change those to 10 it no longer can connect.
I also have the ZD set to auto allow new AP's and it sees the new AP but won't let me edit it and says "This Access Point is not yet approved and connected. Click "Allow" action (if present) and wait for the AP to complete connection."
I get this in the errors "2018/07/05 15:16:43MediumModel[r610] is not supported; connection request from AP[xx:xx:xx:x
So I'm a little lost.
Thank you all for the help