Help with ZF 7363 firmware update
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-06-2020 04:54 AM
Hey, guys, I need help . I am experiecing some trouble with my ZF 7363. I need to upgrade it to 9.10.2.0.11 version of the firmware, but I can't find it anywhere. Does anyone have? Thanks
I know that it1s not the latest, but it's what I need for the moment.
I know that it1s not the latest, but it's what I need for the moment.
7 REPLIES 7
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-06-2020 05:26 AM
Hi Wellington,
9.10 is ZoneDirector firmware. The AP can only be loaded with 9.10 when connected to a Zone Director running that version of code. Once thhe AP is connected to the ZD, it will upload the code to the AP.
Separate ZD AP code in not available.
I hope that helps,
Darrel.
9.10 is ZoneDirector firmware. The AP can only be loaded with 9.10 when connected to a Zone Director running that version of code. Once thhe AP is connected to the ZD, it will upload the code to the AP.
Separate ZD AP code in not available.
I hope that helps,
Darrel.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-06-2020 05:48 AM
Hey Darrel,
Thanks for the help.
Thanks for the help.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-06-2020 05:27 AM
Hi Wellington,
May I know if you are using this AP as stand alone or connecting to a ZD?
If it is an stand alone AP, you can use the most latest supported version 100.1.0.0.500. If you are connecting this to ZD, then ZD will push the firmware automatically.
Let me know the scenario and I will try to help.
Just to let you know, 9.10.2.0.11 stand alone image is not available in support portal, only ZD image is available which you cannot upload to AP directly.
Regards,
Syamantak Omer
Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn
May I know if you are using this AP as stand alone or connecting to a ZD?
If it is an stand alone AP, you can use the most latest supported version 100.1.0.0.500. If you are connecting this to ZD, then ZD will push the firmware automatically.
Let me know the scenario and I will try to help.
Just to let you know, 9.10.2.0.11 stand alone image is not available in support portal, only ZD image is available which you cannot upload to AP directly.
Regards,
Syamantak Omer
Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-06-2020 05:47 AM
Hi Syamantak,
No, it's not the standard alone version.
The automatic update it's failling every time.
I apreciate your help.
No, it's not the standard alone version.
The automatic update it's failling every time.
I apreciate your help.

