First my network specifics: I have only zf7942, zf2942, and zf2741 models in my network currently running firmware version 9.4.0.2.29. When I look at https://support.ruckuswireless.com/pr... I see 9.4.3.0.16 as the latest before some 9.7.x consoli...
hey guys, i want to use the Ruckus AP 2942 as an WLAN Bridge. Can i configure the AP for bridging from the wireless LAN to the wired network?? ty chris
We found that the data usage is very high each month. From the log of our network, the most usage of the data is the traffic between the AP and the WLAN controller (AP send to Controller). Do you have any data that how many data send and receive betw...
Where do you guys buy the rj45 cable sealer that screws onto the POE-in port of a 77xx series AP? I have a couple, but they don't fit the thread on the Ruckus, and googling didn't turn up much. I have something similar to the "IP67 rated weatherproo...
All, I was just reflecting about how I have my organisation's ZDs and APs implemented and wondered what the impact would be of tunnelling all WLAN traffic to the ZD. Is the tunnel encrypted (ie is there a crypto overhead that will degrade throughpu...
