Hi im having R310 in one place, while R510 in another cust place both have same issue i set 1 master with static ip 192.168.0.20/24, gateway 192.168.0.1, dns 184.108.40.206 i also put dhcp svr with range 192.168.0.50-80, so my slave AP can join once they are connected aft that the remaining 20 AP can join and shown in controller GUi now the problem is, when i happened to unplug the 1x master AP, then one of those slave AP will take over and become master AP.
then this master AP i wrongly plug to any switch without proper configuration, and all the config JUST gone, also this AP become "ConfigureMe xxx" SSID if i connect to this ssid and go to GUI, it will start over the config from scratch. Any idea why?
I have been spending weeks just to figure out on this part. Not really sure how unleash works. i