ruckus unleashed 200.2 version R510

[adnan_adnan]

Dear sirs.

Is there any posibility to get Unleashed 200.2 version for Ruckus R510? thx in advance...

[syamantakomer]

Hi Adnan,

Only below AP models are supported on 200.2 version.

[syamantakomer]

R510 started supporting from 200.3 version. Same is available on support website.

https://support.ruckuswireless.com/software_downloads/1134-ruckus-unleashed-ap-200-3-9-13-228-ga-sof... 

Supported Platforms
Unleashed version 200.3.9.13.228 supports the following Ruckus AP models:
• R310
• R500
• R510
• H510
• R600
• R710
• T300
• T300e
• T301n
• T301s
• T710
• T710s

NOTE: 200.2 version is not recommended! Please use 200.7 or 200.8

[adnan_adnan]

Dear mr Omer.

Thank You for information that You gave to me. I have upgraded my Access point to Unleashed 200.3 firmware version.

I have one more question. When I Try to make SSID with Social media authentication (Facebook), in the configuration steps, after I chose Facebook, then click on "Here" (as You can see on the picture in the attachment), the Facebook Bypass window (as this on the picture Social media login 2, second picture) doesn't apear and I can't finish my configuration. What could be a problem? thx in advance

[syamantakomer]

Please follow below article.

https://support.ruckuswireless.com/articles/000010453