cancel
Showing results for 
Search instead for 
Did you mean: 

how to setup VLANs on R600 unleashed

guest_stonecali
New Contributor II
I'm trying to setup 4 R600 Unleashed access points with multiple VLANs. The APs have been assigned static IPs on the default LAN.  I will be creating 6 different SSIDs, each with its own DHCP scope if not VLAN. The clients will receive IPs via DHCP relay.  Where in the Unleashed setup do I create the VLANs and associate them with their SSIDs?

Thanks,
BJ
18 REPLIES 18

michael_brado
Esteemed Contributor II
.

daniel_m
Contributor

I use multiple VLANs with Unleashed.  When creating the “WiFi Network/WLAN,” click Show Advanced Options and specify the Access VLAN in the Priority tab (this is with version 200.2.9.13.186).

michael_brado
Esteemed Contributor II
Gold star Daniel.  BJ. you need your switch ports to Trunk the VLANs you assign to your SSIDs, as well as the Unleashed subnet VLAN.

guest_stonecali
New Contributor II
Thanks for the response Daniel, I had already configured the WLAN so I needed to figure out how the GUI worked to edit it.

Michael, the Unleashed subnet VLAN is the default, untagged VLAN.  Is that an issue?  I plugged in the 2nd of 4 access points and it's not auto-configuring; in fact it's trying to set itself up as the master.