cancel
Showing results for 
Search instead for 
Did you mean: 

Standalone to Unleashed

amayacitta_gill
New Contributor II

Hi all, I just upgraded from standalone to unleashed on my R310 (R310_200.7.10.202.121)

I understand the https://unleashed.ruckuswireless.com/ portal should be accessible but i cant see it, i'm using Cisco Umbrella which changes my local DNS to 127.0.0.1 as i'm using the roaming client, this gives content filtering through DNS proxy when outside of my work network. I think this may be unsupported along side Unleashed? Can someone assist.

If i nslookup unleased.ruckuswireless.com it comes back with the below address. Should this resolve to the master AP? If i try and HTTPS to the master AP I get no response, however wireless is working fine.

Image_ images_messages_5f9c198fbd25505315505bc9_8137bf6336ab4d4464a7ca246bf2965a_Untitled-3e3df444-496b-4338-a1d1-3edd04a2808e-515118528.png

 

1 ACCEPTED SOLUTION

amayacitta_gill
New Contributor II

Ok so factory default and clean start works fine, Umbrella roaming client is back on and it all works fine. The address now resolves to the master AP and I can also access the master AP directly by AP. Something must of screwed up with the firmware upgrade!

View solution in original post

7 REPLIES 7

eduardo_rivas
New Contributor II

I have firmware 114.0.0.0.1360. How do I get unleashed on my R510. I can SSH in but that is all.

@Vesalius​ i found the cli commands. All went perfect.