802.1X using EAP TLS

[Anonymous]

RADIUS Client:  Ruckus R710 Unleashed

RADUIS server with NPS - Windows Server 2016

When I configure the AAA Servers on unleashed and set TLS to enable the shared secret greys out and is inaccessible. 

How can I know the shared secret so I can configure that on the RADUIS server?

[syamantakomer]

Hi Aaron,

I hope you have pushed the certificate to end user machines and configured the radius policy correctly.

Here is an article explaining windows NPS policy config for TLS.

https://support.ruckuswireless.com/articles/000002428

[Anonymous]

Thanks for the document, it is a bit outdated as the last 4 instructions do not match Server 2016, however it explains enough. 

Yes I am trying to figure out if I did the cert part correct or not.  That may be the issue.  I am researching how to create a cert with 2016 and issue via Group policy (or for the ipads via JamF MDM).  

[syamantakomer]

Hi Aaron,

Its bit difficult to maintain 3rd party vendor product's manual and features updated but we do update time to time.

Thanks for notifying, we will check and get it updated.