Showing results for 
Search instead for 
Did you mean: 

802.1X using EAP TLS

New Contributor II

RADIUS Client:  Ruckus R710 Unleashed

RADUIS server with NPS - Windows Server 2016

When I configure the AAA Servers on unleashed and set TLS to enable the shared secret greys out and is inaccessible. 

How can I know the shared secret so I can configure that on the RADUIS server?

Image_ images_messages_6079da8b10fddf6912f69a82_c04c6ed0ee326168f5c91cb4b2a1469b_TLS-b66cb569-04cb-4f93-8bd4-13b3c2c47a97-505158578.jpg



Hi Aaron,

I hope you have pushed the certificate to end user machines and configured the radius policy correctly.

Here is an article explaining windows NPS policy config for TLS.

Syamantak Omer | Sr.Staff TSE | CWNA | CCNA | RASZA | RICXI

Thanks for the document, it is a bit outdated as the last 4 instructions do not match Server 2016, however it explains enough. 

Yes I am trying to figure out if I did the cert part correct or not.  That may be the issue.  I am researching how to create a cert with 2016 and issue via Group policy (or for the ipads via JamF MDM).  

Hi Aaron,

Its bit difficult to maintain 3rd party vendor product's manual and features updated but we do update time to time.

Thanks for notifying, we will check and get it updated.

Syamantak Omer | Sr.Staff TSE | CWNA | CCNA | RASZA | RICXI