why can not using the sampe ip address ?

[tryono_taufik]

Hi guys, when i first setup virtual smartzone 3.6.1 in the option section for control,cluster,management. I have to fill in the ip address alternately. Why can not use the same ip address ?
Thanks

[james_mckenna_5]

Hello Tryono,

By default, the .ova builds a VM with 3 network interfaces. it sounds like you just want to build a 1-interface vSZ.

If you want to build a SZ with a single IP, then follow these steps:

1. Power-off the VM
2. Go to the VM settings, delete virtual NICs 2 & 3
3. Power-up the VM.

Continue with the set-up steps again.

James

[tryono_taufik]

Hello James,

ok i will try it. thanks before.

[tryono_taufik]

Hi James, how if disconnect port ? is it the same with delete interface ?

[tryono_taufik]