cancel
Showing results for 
Search instead for 
Did you mean: 

what the difference tunneling vs. LBO (local break out)

hafiz_heryanto
New Contributor
I would like to ask what the difference tunneling vs. LBO (local break out), can explain, because I do not have any information about the documentation.
2 REPLIES 2

michael_brado
Esteemed Contributor II
If your WLAN is tunneled, all client traffic goes back thru an encapsulated tunnel to the ZoneDirector,
and then onto the network (ie at the data center).  Local break out, means the client traffic goes onto
the network at the AP (ie at the site).

Whether locally at the AP, or tunneled back to the ZD, you would need the Client WLAN's VLAN at the
switch port where the client traffic hits the network.

david_henderson
Contributor II
Tunnel requires less vlans on the switchport since traffic will be placed on the proper vlan at the controller
Breakout at the edge should improve performance since the traffic can go from the wireless device to its destination without being routed through controller
Ruckus prefers breakout at the edge. This is what we did but it did take some extra work on our core switch and edge switches