09-20-2022 01:23 AM - edited 03-14-2024 11:07 AM
Summary:
In this article, I am going to explain the configuration steps of Social Login Guest Portal authentication with Google.
Network Environment:
Setup Procedure:
For this example, all other settings including VLAN assignment for end-user devices are set to the default values.
Next click 'OK'.
This configuration will be good to go ahead with Social Media login With Google.
Regards,
Leimapokpam Ambika
04-10-2023 08:04 AM - edited 04-10-2023 09:28 AM
Can someone confirm whether this feature is still broken due to certificate issues? Last I heard a fix was being considered for version 7.1 which will likely not be released until 2024.
I was confused, the INTERNAL authentication to your Google tenant is what is currently broken. This article explicitly specifies EXTERNAL authentication, which is outside our use case.
07-19-2023 06:05 AM
Hy, what should I consider or allow on the firewall the client uses Palo Alto. the client says that everything is released for the device/AP/controller, but after inserting the email the device keeps loading and timeout, I replicated its settings in my lab and it worked perfectly
07-21-2023 11:42 AM
Hi Evandro, If there is no issue observed in the lab environment which has no firewall, I doubt it would be a network issue. I recommend you to take a pcap on firewall side and see if there is any traffic drops.