cancel
Showing results for 
Search instead for 
Did you mean: 

snmpwalk not producing Ruckus vendor specific OIDs

hermanus_de_jag
New Contributor
Good Morning,

I am trying to setup snmp v2 monitoring on our vSZ, but I am not getting the Ruckus Vendor specific OIDs when doing an snmpwalk. Any ideas why not.

Command I use:

snmpwalk -v2c -c public 10.132.0.3 .1.3.6.1.4.1.25053.1.4.2.1.1.1.2.1.1

Then I get  the following:

RUCKUS-ROOT-MIB::ruckusSZWLANModule.1.1.1.2.1.1 = No Such Object available on this agent

If I do a normal snmpwalk -v2c -c public 10.132.0.3 I also not seeing any Ruckus specific OIDs.

We are currently using the Ruckus vSZ-H version 5.1.2.0.302

1 REPLY 1

diego_garcia_de
Contributor III
Hi Hermanus,

Quick question. Is that targetting vSZ itself or the APs? im guessing its the SZ but just wanted to be sure. (The APs use different MIBs, actually they are hard to get but are basically de standalone)