smartzone 不断重新认证

[cangqingse]

咨询一个问题，smartzone开放3个无线信号，信号1开启身份认证采用ldap服务，另外2个采用密码加密认证，链接信号1身份认证通过，切换到信号2或3，再切回信号1时需要重新身份认证。身份认证时效宽限期未到。

[Sunil_Acharya]

Hi Cangqingse,

If you are not using PSK SSID , you could try off.

Have you tried the method which requested ?

Try to disconnect to LDAP SSID and don't connect to any SSID for 5 mins and then reconnect to the LDAP SSID and check if the certification progress is still asking for the connection

Regards,

Sunil Acharya

[Sunil_Acharya]

Hi Cangqingse,

If the PSK SSID is not use, you could remove from the network.

Thank you.

Regards,

Sunil Acharya