Showing results for 
Search instead for 
Did you mean: 

controller not see ap

New Contributor

There is Smart Zone 104 firmware and AP R760 release 6.1.0.x patch rolled up. The controller does not see the dot in the zone. ( Actions according to the datasheets of both the controller and the AP have been carried out - there is no result.


New Contributor
An access point is a device that creates a wireless local area network, or WLAN, usually in an office or large building. An access point connects to a wired  love language test  router, switch, or hub via an Ethernet cable, and projects a WiFi signal to a designated area. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds. Alternatively, the UniFi AP may be reset remotely via a Reset button located on the bottom of the Gigabit PoE adapter. Cable Feed Plug If your Ethernet cable feeds along the mounting surface, remove the Cable Feed Plug.