Hi all,
We are using SmartZone to manage around 2X Ruckus APs for my open office and even having Multigiga uplink for a maximum 5giga Lan speed for each AP to the PoE switch.
We configured only 5G radio 80Mhz for all APs and shut down the 2.4Ghz.
The Iperf3 speed test result from one wireless Mac PC to one wired VM Server over the same layer 2 Subnet server is quite slow and just around 5~7X Mbps.
The WIFI signal is around -60 during the test.
What can we do to speed up the WIFI data passing through my network?
Thanks.
