cancel
Showing results for 
Search instead for 
Did you mean: 

T310C Rejected by SZ100 ACL

shaun_strydom
New Contributor III
Hi all, I'm experiencing ACL rejecting issues of a new T310c im trying to add to a SZ100. 

Below is the error im seeing on the event logs.

model [T310C] is not being upgraded with SmartZone AP firmware because of ACL setting.

I have tried the below with no luck.

sz100# conf 

sz100(config)# lwapp2scg

sz100(config-lwapp2scg)# policy accept-all


Anything else i can try. 


Thanks

13 REPLIES 13

shaun_strydom
New Contributor III
Tried that, also doesn't seem to work the SZ sees the AP, but rejects it.
2018/12/11 14:50:14
2003
ZD AP rejected
Warning
ZD-AP [60:D0:2C:23:9D:30] / [171803000705] model [T310C] is not being upgraded with SmartZone AP firmware because of ACL setting.
2018/12/11 14:49:17
2003
ZD AP rejected
Warning
ZD-AP [60:D0:2C:23:9D:30] / [171803000705] model [T310C] is not being upgraded with SmartZone AP firmware because of ACL setting.
2018/12/11 14:49:12
2003
ZD AP rejected
Warning
ZD-AP [60:D0:2C:23:9D:30] / [171803000705] model [T310C] is not being upgraded with SmartZone AP firmware because of ACL setting.
2018/12/11 14:49:07
2003
ZD AP rejected
Warning
ZD-AP [60:D0:2C:23:9D:30] / [171803000705] model [T310C] is not being upgraded with SmartZone AP firmware because of ACL setting.
2018/12/11 14:49:02
2003
ZD AP rejected
Warning
ZD-AP [60:D0:2C:23:9D:30] / [171803000705] model [T310C] is not being upgraded with SmartZone AP firmware because of ACL setting.
2018/12/11 14:48:57
2003
ZD AP rejected
Warning
ZD-AP [60:D0:2C:23:9D:30] / [171803000705] model [T310C] is not being upgraded with SmartZone AP fir

paul_mcguire_20
Contributor
Do you have an available license in SZ for the AP?

shaun_strydom
New Contributor III
Yes, 1x License available added it for this extra outdoor AP.

shaun_strydom
New Contributor III
Could it be a bug in the firmware?

martin_martin
Valued Contributor
No it is not Skaap.

Can you just open a ticket with support and we check it out. mention the forum and my name and topic
It looks like something simple to fix.

Regards
Martin