T310C Rejected by SZ100 ACL

[shaun_strydom]

Hi all, I'm experiencing ACL rejecting issues of a new T310c im trying to add to a SZ100. 

Below is the error im seeing on the event logs.

model [T310C] is not being upgraded with SmartZone AP firmware because of ACL setting.

I have tried the below with no luck.

sz100# conf 

sz100(config)# lwapp2scg

sz100(config-lwapp2scg)# policy accept-all

Anything else i can try. 

Thanks

[pilot1199]

AP firmware? 

[martin_martin]

Please first provide the firmware used on the SZ100 controller and also from the AP.

Regards
Martin

[shaun_strydom]

Sz100 Firmware version 3.6.2.0.78
AP T310c Firmware version 108.0.0.771

[martin_martin]

Hi Skaap

So disable the lwapp2scg as that is for older firmware (zd based) and use the set scg ip x.x.x.x or the set director ip x.x.x.x and the AP will connect to the controller.
The 10x.x.x.x firmware has both clients in there (ZD and SZ), and you need to use the SZ client to connect to the controller.

Regards
Martin