cancel
Showing results for 
Search instead for 
Did you mean: 

SmartZone 104 R550 Patch

sogalli
New Contributor III

HI

I recently installed a patch on Smartzone 104 to support R550 APs running below firmware details. Then created a Zone and moved the R550 to the new Zone. if i try to push firmware (highlighted in red) i dont get option to pick the new firmware to push to the R550. Please note that support license for this controller is out of service.

Ruckus-01# show version
Model : SZ104
Serial # : **************
SZ Version : 5.2.1.0.515
Control Plane Software Version : 5.2.1.0.383
Data Plane Software Version : 5.2.1.0.101
AP Firmware Version : 3.6.0.0.709, 3.6.1.0.354, 3.6.2.0.759, 5.2.0.0.5527, 5.2.1.0.698

 

5 REPLIES 5

syamantakomer
Moderator
Moderator

When you created the zone, what AP firmware was selected?

Regards,
Syamantak Omer
Official Rep | Staff TSE | CWNA | CCNA | RASZA | RICXI

HI

The only visible firmware is the default firmware 5.2.1.0.101 and not 5.2.0.0.5527. 

Could you pull the controller upgrade history and share.

If controller was running on 5.2.0 in past, you may not be able to create zone with old AP patch.

Regards,
Syamantak Omer
Official Rep | Staff TSE | CWNA | CCNA | RASZA | RICXI

HI Thanks for your response, please allow me to get more details and share.