RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
08-27-2024 01:15 AM
Ive got a SZ124 with this current version states
Modellname SZ124
Controller Version 5.2.2.0.317
Control Plane Software Version 5.2.2.0.126
Data Plane Software Version 5.2.2.0.21
AP Firmware Version 5.2.2.0.301
Used Access Points T300 | T750 | R500 | R510 | R550
ive found the newest version for the SZ124 wich should be 6.1.0.0.961.
But im curios about the newest version number for the Access Points?
I guess its 5.2.2.0.2122 from 2024-03-22 but im not sure, could someone confirm this?
Solved! Go to Solution.
09-01-2024 08:48 PM
You can actually upgrade all the way to 6.1.2 but, as you note, this is a Technology Release for your controller and your 802.11ac APs.
You can see new features in the release notes for newer releases. There's e.g. support for newer AP and switch models, more switch management features, etc, etc.
08-30-2024 07:46 AM
ive found that the 5.2.2.0 is the lastest recommend Stable Release.
would there be any reason to Upgrade the AP Firmware | WLC Firmware, or schould i just stay on the Versions ive got?
09-01-2024 08:48 PM
You can actually upgrade all the way to 6.1.2 but, as you note, this is a Technology Release for your controller and your 802.11ac APs.
You can see new features in the release notes for newer releases. There's e.g. support for newer AP and switch models, more switch management features, etc, etc.
09-05-2024 12:01 AM
thanks so i guess i will stick to the 5.2.2.0.317 since this is the recommend version
