cancel
Showing results for 
Search instead for 
Did you mean: 

Port Group for SZ-144 Controller

Naz
New Contributor

Greetings,

I new to ruckus, I need to setup a SZ144 controller with 4 1G Ethernet ports , 4 10G Ethernet SFP+ Ports

Can you please let me know if I select only one port group to create and I   connect only 10G Ethernet SFP +  to switch. does it work?

If I  select Two Portgroup to create and  Can I connect  Two connect 10G Ethernet SFP + to same switch? does it work? or it is mandatory to connect to 1G Ethernet port.

Thank you 

 

1 ACCEPTED SOLUTION

pmonardo
New Contributor III

port-groups are not LACP, they simply separate control traffic from data traffic. 
take a look at this
https://docs.commscope.com/bundle/sz144-quicksetupguide/page/GUID-67BE7974-ACF8-4FAA-A686-FA9C0299E7...

View solution in original post

1 REPLY 1

pmonardo
New Contributor III

port-groups are not LACP, they simply separate control traffic from data traffic. 
take a look at this
https://docs.commscope.com/bundle/sz144-quicksetupguide/page/GUID-67BE7974-ACF8-4FAA-A686-FA9C0299E7...