how to migrate ZD full configuration of WLAN,ZONE, MAC Address Filtering into SmartZone,
Referring into this KB mention only AP can be migrate not all configuration from ZD.
https://support.ruckuswireless.com/articles/000006305.
Need advice on this thing. If cannot it is need to configure manually into Smart.
My plan as per below, please comment if i missing something.
1. UP 1 box of SZ100-1 and setting cluster.
2. Import all AP from ZD using migration toll
3. Manually config for zone, WLAN, client filtering, guest ssid, etc.
4. New SZ100-2 joined cluster and synd with primary.
5. As all AP and controller in same subnet, both new SZ100 with connected to the switch using 1 eth port.
6. no need to connect point to point between SZ100
Please advise.
thanks
