LBO

[AhmeeR]

I am new to ruckus. I have SZ 144 controller with R850 APs and third parties, Huawei and Cisco, cascaded switches connecting them. 

I need to configure LBO (local internet breakout) for my all SSIDs (WLANs) and APs. How can I do that? 

Any help please. Thank you 

[James]

Usually the Ruckus APs are connected to a trunk port on the switch side and the AP gets its own from the native (untaged) VLAN on the switch side. Remaining user VLANs must be tagged on the switch. 

The user VLAN for the SSID should be added under advanced options of the WLAN config. Users connecting to this SSID will receive and IP address from the said VLAN.

[AhmeeR]

Thank you James. Really you showed me the way. 

Let me add one more question. How can we make connection, or form relation between AP and SSID? In other words, Do all APs under a zone or AP group are assigned to a WLAN under that similar zone or WLAN group?

[James · Accepted solution]

Hello,

Yes, the default AP zone has the default AP group under it. The default WLAN group is mapped to all APs under the default AP group. All WLANs created will by automatically  be added to the default WLAN group.

Please check the below video from us for a short demo on this
https://www.youtube.com/watch?v=HwZf0KAKydI