Inactivity Timeout set -Terminate idle user session in vSZ-H
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-12-2020 11:32 AM
I am having issue to keep Door Locks online all the time with multiple clients, the door lock weak-up every one hour to check the internet connectivity and once it miss the hard-beat send alarm message to the client over-all building so please can you advise how we can disable or increase more than 15 min (1000 Sec) in this SSID, is there is CLI command to do that?
4 REPLIES 4
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-12-2020 12:16 PM
You can't do that, 5.2 presented us with the ability to increase this from 1000 seconds.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-12-2020 12:30 PM
yes i believe we need to get Ruckus to get this part customized specially for the wireless devices working in battery and they don't have any background traffic.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-12-2020 01:40 PM
I'm not fluent in SmartZone platform, but we have a KBA-2433: Maximum values for Inactivity time out & Grace period
https://support.ruckuswireless.com/articles/000002433
... that suggests you might be able to use "Grace Period" in addition to maximum "Inactivity Timeout"?
------------------
Inactivity timeout can be set on WLAN at ZD web UI >> Configure >> WLANs >>(Edit a WLAN) >> Advanced options
For vSZ/SZ: Navigate to the WLAN> Configure WLAN>> Advance Options.
Inactivity timeout refers to the disconnection of the idle clients from the associated AP.
For ZD,
Minimum Value: 60 Seconds
Maximum Value: 500 minutes
For SZ/vSZ,
Inactivity timer:
Minimum Value: 60 Seconds
Maximum Value: 1000 Seconds
Grace period allows disconnected users a grace period after disconnection,
during which clients will not need to re-authenticate, on Web based authentication
(including Guestpass and Hotspot).
For ZD,
Minimum Value: 1 minute
Maximum Value: 144,000 minutes
For SZ/vSZ,
Minimum Value: 1 Minute
Maximum Value: 14,300 Minutes
https://support.ruckuswireless.com/articles/000002433
... that suggests you might be able to use "Grace Period" in addition to maximum "Inactivity Timeout"?
------------------
Inactivity timeout can be set on WLAN at ZD web UI >> Configure >> WLANs >>(Edit a WLAN) >> Advanced options
For vSZ/SZ: Navigate to the WLAN> Configure WLAN>> Advance Options.
Inactivity timeout refers to the disconnection of the idle clients from the associated AP.
For ZD,
Minimum Value: 60 Seconds
Maximum Value: 500 minutes
For SZ/vSZ,
Inactivity timer:
Minimum Value: 60 Seconds
Maximum Value: 1000 Seconds
Grace period allows disconnected users a grace period after disconnection,
during which clients will not need to re-authenticate, on Web based authentication
(including Guestpass and Hotspot).
For ZD,
Minimum Value: 1 minute
Maximum Value: 144,000 minutes
For SZ/vSZ,
Minimum Value: 1 Minute
Maximum Value: 14,300 Minutes
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-21-2022 12:40 PM
Hello Michael
Just saw your post about the inactivity timeout setting from a ZD. Is this only available on a ZD and not on the AP via CLI? I am running some standalone 7982 APs and would really like to increase the inactivity time to the max which you mention is 500 minutes? Would this work on a ZD 1100? TIA.

