I have this error on my controller SmartZone100.

[alexi]

I have this error on my controller SmartZone100.

Inodes that were part of a corrupted orphan linked list found. Fix? yes

Inode 3147349 was part of the orphaned inode list. FIXED.
Inode 3147460 has a extra size (16877) which is invalid
Fix? yes

Inode 3147569 has illegal block(s). Clear? yes

Illegal block #0 (2088694642) in inode 3147569. CLEARED.
Illegal block #2 (4137418934) in inode 3147569. CLEARED.
Illegal block #4 (4075552854) in inode 3147569. CLEARED.
Inode 3147569, i_size is 598, should be 24576. Fix? yes

Inode 3147569, i_blocks is 8, should be 2. Fix? yes

Error while reading over extent tree in inode 3147633: Corrupt extent header
Clear inode? yes

Inode 3147633, i_blocks is 8, should be 0. Fix? yes

ata1.00: exception Emask 0x0 SAct 0x20000 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:88:10:15:40/00:00:0c:00:00/40 tag 17 ncq 4096 in
res 41/40:08:10:15:40/00:00:0c:00:00/40 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
..........

Pid： 688， comm： e2fsck Tainted： G B D W -- ------------ 2.6.32-696.18.7.11.5100rks.el6.x86_64 #1
Call Trace：
[<ffffff815460fc>] ？panic+0xa7/0x179
[<ffffffff8154c594>] ？oops_end+0xe4/0x100
[<ffffff810515eb>] ？no_context+0xfb/0x260
[<ffffff81051875>] ？__bad_area_nosemaphore+0x125/0x1e0
[<ffffff8105199e>] ？bad_area+0x4e/0x60
[<ffffff810521c3>] ？__do_page_fault+0x473/0x500
[<ffffff8154e4fe>] ？do_page_fault+0x3e/0xa0
[<ffffff8154b365>] ？page_fault+0x25/0x30
[<ffffff81189a8e>] ？mem_cgroup_get_reclaim_stat_from_page+0x3e/0x70
[<ffffff81189a70>] ？mem_cgroup_get_reclaim_stat_from_page+0x20/0x70
[<ffffff8114529d>] ？update_page_reclaim_stat+0x2d/0x70
[<ffffff81145e23>] ？____pagevec_lru_add+0xe3/0x180
[<ffffff81145f33>] ？__lru_cache_add+0x73/0x90
[<ffffff8112f3fe>] ？add_to_page_cache_lru+0x3e/0x50
[<ffffff8112ffc7>] ？grab_cache_page_write_begin+0xa7/0xc0
[<ffffff811c493e>] ？simple_write_begin+0x3e/0x80
[<ffffff8112f813>] ？generic_file_buffered_write+0x123/0x2e0
[<ffffff81084367>] ？current_fs_time+0x27/0x30
[<ffffff81131270>] ？__generic_file_aio_write+0x260/0x490
[<ffffff8100ec30>] ？dump_trace+0x190/0x3a0
[<ffffff81131528>] ？generic_file_aio_write+0x88/0x100
[<ffffff8119a47a>] ？do_sync_write+0xfa/0x140
[<ffffff810a71a0>] ？autoremove_wake_function+0x0/0x40
[<ffffff8115b120>] ？__get_user_pages+0x110/0x430
[<ffffff8113f409>] ？free_hot_cold_page+0x1c9/0x220
[<ffffff811a09e4>] ？dump_write+0x34/0x50
[<ffffff811f6c85>] ？elf_core_dump+0xed5/0xfa0
[<ffffff811a156b>] ？do_coredump+0x95b/0xf90
[<ffffff8109498d>] ？__sigqueue_free+0x3d/0x50
[<ffffff8109871d>] ？get_signal_to_deliver+0x1ed/0x460
[<ffffff8100a265>] ？do_signal+0x75/0x870
[<ffffff81070000>] ？init_sched_build_groups+0x90/0x1a0
[<ffffff8154621d>] ？printk+0x4f/0x52
[<ffffff8100aaf0>] ？do_notify_resume+0x90/0xc0
[<ffffff815533cc>] ？retint_signal+0x48/0x8c
ERROR: Type:2; Severity:90; Class:0; Subclass:5; Operation: 1003

Anyone have had the same problem?

What should I do with this device？

[Vineet_nejwala]

@alexi 

Please reach out to Ruckus/CommScope support and provide the serial of this unit to validate the active support. Mostly the unit is having HDD failure and would need replacement.

Best Regards

Vineet

[alexi]

@Vineet_nejwala 

Thanks