How to use the IOT Controller Node Red Option For SmartZone Controller Device

[laeeq2410]

Hi;

I'm new in Ruckus Devices. I have Smart Zone Controller having the VIRTUAL SMARTZONE - HIGH SCALE Software on that. I want to use the IoT Controller Suite NODE RED Option to get the devices information on my webserver. 
How can I use the IoT Controller Suite Node Red Option? Do I have to update the software somewhere or connect some device with the SmartZone controller? 

Please Guide.

Regards

Laeeq
 

[Phiravin]

Hi @laeeq2410 

You can use SNMP. It can be configured from the controller System settings. The MIB file can be downloaded for 5.1 from our support site.

Regards,
Phiravin

[laeeq2410]

HI Phiravin;

Thank you for the answer. So to use the SNMP is it necessary to buy and use zone director or i can do this with my vSZ 5.1.

Regards
Laeeq

[Phiravin]

Hi @laeeq2410 

You can configure SNMPv2 or SNMPv3 in vSZ. Please refer to the links below.

vSZ-E Admin Guide (5.1):

https://docs.commscope.com/bundle/sz-510-adminguide-sz100vsz/page/GUID-6D43033C-5149-47C4-BDA8-9E79A...

vSZ-E SNMP Reference Guide (5.1)

https://support.ruckuswireless.com/documents/2542-smartzone-5-1-ga-snmp-mib-reference-sz100-vsz-e

Regards,

Phiravin