cancel
Showing results for 
Search instead for 
Did you mean: 

How to use the IOT Controller Node Red Option For SmartZone Controller Device

laeeq2410
New Contributor II

Hi;

I'm new in Ruckus Devices. I have Smart Zone Controller having the VIRTUAL SMARTZONE - HIGH SCALE Software on that. I want to use the IoT Controller Suite NODE RED Option to get the devices information on my webserver. 
How can I use the IoT Controller Suite Node Red Option? Do I have to update the software somewhere or connect some device with the SmartZone controller? 

Please Guide.

Regards

Laeeq
 

12 REPLIES 12

Phiravin
RUCKUS Team Member

Hi @laeeq2410 

You can use SNMP. It can be configured from the controller System settings. The MIB file can be downloaded for 5.1 from our support site.

Regards,
Phiravin

laeeq2410
New Contributor II

HI Phiravin;

Thank you for the answer. So to use the SNMP is it necessary to buy and use zone director or i can do this with my vSZ 5.1.

Regards
Laeeq

Phiravin
RUCKUS Team Member

Hi @laeeq2410 

You can configure SNMPv2 or SNMPv3 in vSZ. Please refer to the links below.

vSZ-E Admin Guide (5.1):

https://docs.commscope.com/bundle/sz-510-adminguide-sz100vsz/page/GUID-6D43033C-5149-47C4-BDA8-9E79A...

vSZ-E SNMP Reference Guide (5.1)

https://support.ruckuswireless.com/documents/2542-smartzone-5-1-ga-snmp-mib-reference-sz100-vsz-e

Regards,

Phiravin