How to setup network wireless bridge when TWO T350se were managed by Smartzone

[SmallPotato]

Hi all,

We have two T350se managed by Smartzone, and we want to deploy them to two buildings as office extensions.

How to set up those units on SZ so we can use them as a network bridge?

Thanks. 

[Jeronimo]

First, Create another zone for mesh. And enable mesh function on the zone.

Second,

1) Common method

   - Connect and Move two aps under the zone at samrtzone.

   - Root AP is connected to wired network and non-Root-AP is connected to only Poe injector(or only Poe switch) without wired uplink.

2) Zero touch mesh

   - Connect and Move Root aps under the zone at smartzone.

   - Enable Zero touch mesh founction at the zone, and add serial number of non-Root-AP

   - Root AP is connected to wired network and non-Root-AP(factory default) is connected to only Poe injector(or only Poe switch) without wired uplink.

Is it easy?