cancel
Showing results for 
Search instead for 
Did you mean: 

How can I configure IPv4 AAA in a zone using IPV6?

anthony_anyoti
New Contributor III
I have zones using IPv6 for AP management but wanted to create AAA using IPV4. I am however not able to as it is only requesting for an IPV6 address. Is there a work around to this? It is extremely important to have the AAA working on IPV4 for external analytics and captive portal functionality.Image_ images_messages_5f91c3e5135b77e2478d1d4b_c524f4edf6325ba6acdbc43782a22962_RackMultipart20170202128295fcs-b89fa285-7c30-4ed5-9dad-7a1ea5017838-1836868162.jpg1486036394
2 REPLIES 2

michael_brado
Esteemed Contributor II
Hi Anthony,
   Assuming you have a vSZ-H, you need to have enabled both IPv4 and IPv6 in the initial
startup wizard.  If you have both protocols enabled, you can have IPv6 AP Mgt, and IPv4
AAA servers (should be an option).

jhoney_perker
New Contributor
Firstly you need to check the manual guide because our main solution is under guidebook,if there was no helps for you then you can contact QuickBooks help, they provide the errorless solution for all.I am getting help from them,